AMS Equipment:

Ag Management Solutions

John Deere Ag - Features for StarFire™ RTK  

Provides 1-inch repeatable accuracy

 

John Deere Ag -  GreenStar™ 2 Display 2600  State-of-the-art, 10.4-in. color, touch screen display

The GS2 2600 is a 10.4-in. color touch screen display. It features state-of-the-art, full-color screens that allow the operator to configure and simultaneously view multiple applications on one home page.

The GS2 2600 runs the GreenStar™ Basics software package, included in base equipment, which contains: Parallel Tracking Field Doc™ Map-based Prescriptions Harvest Doc™ On-Screen Mapping These optional Pro Modules can be purchased and unlocked on the display with a 26-digit activation code. AutoTrac™ PivotPro  Swath Control Pro™ A 15-hour demo activation for AutoTrac, PivotPro, and Swath Control Pro are included on each GS2 display.

John Deere Ag - AutoTrac™ SF2 

AutoTrac™ reduces overlap

AutoTrac™ reduces operator fatigue

AutoTrac allows operators to be more productive as they focus on tasks, other than steering, while traveling down the field.

When operators have to spend their entire work day manually steering a machine while watching for obstacles and checking to make sure the implement is operating as designed, they get very tired. Using the AutoTrac Assisted Steering System greatly reduces the strain on the operator because the system accurately guides the vehicle down the most optimum pass, consequently reducing input costs, all the while allowing the operator to focus on other tasks at hand.

Other benefits to the operator include:

• Being able to watch the implement more closely to see if parts are wearing out or failing allowing them to be proactive rather than reactive.
• Keeping a watchful eye out for damaging obstacles in the field such as rocks, washouts or holes caused by broken tile lines.

All these benefits result in more uptime for the equipment and an operator who is more alert at the end of the day, a benefit everyone can appreciate.

AutoTrac™ allows for faster working speeds

Productivity is very important to any successful farming operation. A greater number of acres can be covered when a machine is traveling across field at higher speeds, and this directly affects productivity.

AutoTracTM allows operators to travel faster throughout the working day because they are not concentrating on manually steering the vehicle on the correct pass through the field; AutoTrac accurately steers for them. This value is obvious when performing tasks that require high rates of speed such as spraying or while completing difficult passes with contours or curves. Being able to work faster, if only by a mile or two per hour more, will boost productivity on any operation and the farmer will feel better at the end of the day.

Swath Control Pro™ improves machine efficiency

By shutting off sections where product has already been applied or planted, Swath Control Pro helps to minimize input costs. Yields may also be improved by reducing crop damage or over-planting.

Swath Control Pro eliminates the need for the operator to manually shut off implement or sprayer boom sections; therefore, operator fatigue is reduced, resulting in the following:

• Longer hours running in the field, getting the job done faster
• Less risk of forgetting to turn sections back on after making a headland turn
• Allows less experienced operators to make an accurate application

Swath Control Pro™ improves land stewardship

Land is every farmer’s most valuable asset, so no one wants to apply excess fertilizer or chemicals. Swath Control Pro allows you to minimize the amount of product applied to the field by making the most accurate application possible.